Racing Parts

CARRILLO RODS LIST PRICE $335 to $353 each.
Racer set pricing includes the CARR BOLTS that never have to be changed for the life of the rod - rods equipped with the limited life WMC bolts list $295 - $313 each. We keep all the four cylinder Alfa units on the shelf and can order BMW, DATSUN, CHEVY, FORD, ETD. for the same price. Custom rods are available on request. Dealer and builder inquiries welcome. We also keep spare small end bushings and rod bolts on the shelf. We will sell single new rods if you happen to damage one
17% LIGHTER... 100% STRONGER THAN STOCK

Carrillo Rods

Model	List each	Racer Set Price *	WMC bolts
1750/2000	$335	$275 x 4 = $1100	$940
1300	$353	$296 x 4 = $1184	$1024
1600	$353	$296 x 4 = $1184	$1024
2.5/3.0 V6	$353	$296 x 6 = $1776	$1536
2.0 TS	$353	$296 x 4 = $1184	$1024

*These prices include Carr bolts that never need replacement
( WMC bolts should be replaced after a couple of rebuilds)

Dealer & Engine builder inquiries welcome

JE FORGED PISTONS
$585 / Set (racer net)
25% Lighter than Stock!

LIST PRICE; $690 set of four, includes standard pins (110 gr./ .150 wall), standard rings and wire locks. RACER NET $585. Super light pins (79 gr/.100" wall), $60 extra. TOTAL SEAL RINGS, $138 extra. We can design and special order any piston you need!

We sell single pistons and pins if you damage one and need a spare. We stock spare ring sets, but unfortunately can not break sets to sell singles.

GENERAL NOTES. I have proven on the dyno that our designs on the JE billets make more power. We have been working with the people at JE on our pistons since 1978 and have yet to see a documented piston related failure. My friends in the Nextel Cup engine business turned me on to them and I have never strayed. Through our racing engine research and on track experience we have continuously modified the designs for better performance and ease of installation. We welcome customer input and have made a number of changes by popular request. We won three SCCA E-PRODUCTION National Championships using the same 81mm pistons you can now buy off our shelf. All of the professional Alfa engine builders use our JE design pistons. If you are not a pro, then you will enjoy following our three page set of instructions that come with each set. If you encounter problems or have questions, I am happy to help you over the phone at any time.

JE Pistons

ALFA SPECIAL APPLICATIONS

BORE	COMPRESSION	ENGINE
75mm	12.0:1	1300 Big Valve G&F-Production
77mm	10.5	1300 Big Bore to 1400cc (Special order)
79mm	11.5	1600 F-Production SCCA 1600 Big Valve & GTA
81mm	11.0	1600 Big Valve/Big Bore 1700 & GTA
81mm	11.5	1750 Big Valve 1750 E-Production
84mm	7.5	2000 Turbo (Special order)
84mm	10.5	2000 Motronic Dome
84mm	12.0	2000 Big Valve
85mm	12.5	2000 Big Valve
85mm	10.5	2000 Motronic Dome
84mm	10.5	2000 Twin Spark
89mm	10.0	2.5L V-6
93mm	10.5	3.0L V-6

AVAILABLE WITH:
STANDARD -- DEVES RINGS (included)
UPGRADE -- TOTAL SEAL GAPLESS
RING SET $138($207 V-6)
STANDARD -- .150 Wall Pin (98 g)
UPGRADE -- .100 Wall Pin (70 g) - $60 ($90 V6)

LINERS

85MM New $140 each, special cast iron material.
81MM New $140 each, special cast iron material

Reinforced Engine Mounts

	These act as torque arrestors (limits amount of engine rotation due to torque reaction) and prevent sagging of the rubber mount that holds the engine up. Never replace mounts again! Now in light weight billet aluminum!
Click for more info	$67.50 each mount with reinforcement guards Individual reinforcement $27.50 each

Please Call Us at (770) 457-ALFA(2532) or (800) 552-ALFA for a
full inventory of available Alfa Romeo racing parts.
Thanks!

Competition Parts for Alfa Romeo Cars

Competition Parts for
Alfa Romeo Cars