USED - LEFT OVER PARTS -
"STUFF" DEPARTMENT
To
buy any parts listed here, please call direct at the numbers listed at the
bottom of the page

NOS Alfa Romeo Berlina TAG BRACKETS cadmium plated. Part # 105.71.50.179 .
These are designed to mount a tag to a flat surface (multiple applications)
Price $25.00 |

NOS Alfa Romeo 164 OIL LEVEL SENSOR (shallow pan type) part # 605-63896.
Price $50.00 |

2 Alfa Romeo NOS center caps part # 605-01615.
Fits 15” spider (quadrifoglio), 15” Milano Verde Speedline (phone dial) and
14” Milano Gold ed. wheels.
No longer available from Alfa. $20.00 for the
pair. |

Alfa 2000/2600 Clutch Rebuilding Jig. Tool number C.6.0104. Works for
Giulietta, Giulia, Iron Block 2.0 and 2600 models. It is new, unused and
still in the original wooden storage box. Besides
being very useful to rebuild the old captive spring pressure plates, this
rare tool is an enhancement for the tool collection.
$250 |

Rare Commemorative Edition Spider Veloce Key Chain. This one is etched for
the number 99 of the total of 190 cars produced. Found it in a salesman's
desk when we moved to the new shop. If you have this particular unit, you
are in luck. If you have another unit and are missing this important
collector item, it will be easy enough for you to have it re-etched to match
your car's number. The metal and enamel are in excellent condition. Alfa's
cheep gold plating is worn, but can be very reasonably re-plated by most
jewelers. $50.
|
|

AP Racing Clutch with lightened flywheel. Fits all 1300, 1600 and 1750
engines. This twin metallic disc 7.25" clutch setup comes complete with
lightened flywheel and matching release bearing. Weighs in at 19 pounds with
a low moment of inertia. That is 13-16 pounds lighter than original and the
performance difference is remarkable. I used this clutch setup in my 1750
Duetto until we developed our 7.25 Aluminum flywheel with Tilton rally
clutch and reduced the weight to under 10 pounds. It is smooth engaging and
never seemed to wear the discs. It has a 110 tooth ring gear for 1750 bell
housing. For 1300 or 1600 bell housings, it will need to be changed to a 105
tooth ring gear. Still in excellent condition and will make a budget racer a
fine upgrade in performance. $450.
|
To
buy any parts listed here, please call direct at the numbers listed at the
bottom of the page (ask for Todd).
For our
online parts store, please click the box below.
Call 8:30-5 Monday through Friday
(Eastern time)
(770) 457-2532 (Atlanta area) or (800) 552-2532
or Email: [Street Parts
Information] [Race Related]
[Home]
[Race Parts Information]
[Race Shop]
[Street Parts] [Race Parts]
[About Paul Spruell Motorsport]
[Paul's Links] [Spruell
Motorsport Store]
Mfr Links - [Tilton
Brake and Clutch Equipment]
[Carrillo
High Performance Rods]
[Iwis Timing Chains]
[
JE Forged Racing Pistons]
[Panasport
Light Weight Performance and Racing Wheels]
[Porterfield
Racing Brake Shoes and Pads]
[Sachs
Performance and Racing Clutch Assemblies]
[Total Seal
Racing Piston Rings]
[Alfa Romeo
Sports Cars, Parts and Equipment] |
All contents © 1998 Spruell Motorsport, Inc
All rights reserved |
This website supported by WedgeTek,
Inc.
Contact
Webmaster with comments on this site